Settings documentation
(Some settings are not yet documented here. Stay tuned.)
Graphics settings
Backend
We have implemented rendering code for a few common graphics APIs.
- Vulkan: The recommended backend on most devices, if available. On Mac, this will use MoltenVK if available.
- OpenGL: The compatibility option on Android, and available on a lot of other devices too.
Windows-only options:
- D3D11: A good alternative to Vulkan if you're on Windows, very fast and high compatibility.
- D3D9: Mainly useful on very old laptops with Intel GPUs
Rendering resolution
Sets the resolution to render at as a multiplier of the PSP's original resolution. Setting it to higher values than 1x can affect performance, depending on your hardware, but will create a much nicer and sharper image.
4x is almost exactly equal to 1080p (1920x1288 vs 1920x1280), and if you have your monitor set to that, PPSSPP will automatically cut off 4 pixels at the top and bottom of the screen to make it fit.
You might get a bit of extra antialiasing by setting the resolution higher than what your monitor can do, and letting the emulator downscale, there are also a few postprocessing filters that do a good job helping out with that. But it's better to use MSAA in Vulkan.
Not all games work perfectly in higher resolution, as PSP games were made to run at exactly 480x272 and only tested at that resolution. The most common artifact is thin lines between elements in menus and HUD. This can sometimes be worked around by using texture upscaling, but is not always practically fixable, and might have other problems.
Higher resolutions have obvious benefits for 3D games, but 2D games can benefit too, depending on their style. If it's mostly just pixel-aligned sprites art like in King of Fighters (typical of ports from 2D consoles) there won't be any benefits. If they scale and rotate stuff (think Patapon) or use vector graphics like loco roco, that will look better at higher rendering resolutions.
Software Rendering
The software renderer is mostly more accurate, but runs a lot slower than using the GPU to render. It also doesn't allow higher resolutions. Can be useful for development, or a small number of games and homebrew apps that the hardware renderers can't handle, or if you just like the look of authentic PSP rendering with dithering and so on.
VSync
Tries to avoid presenting a new image in the middle of your monitor's display refresh, by using whatever option is available to do so. This doesn't always make a difference at all, so if you don't see any issues with screen tearing, best to leave it off.
Display layout and effects
Allows you to move around and stretch the actual PSP display on the screen as desired, and additionally apply various optional post-processing effects, some of which are documented below:
- FXAA Antialiasing - a cheap but not that effective method of antialiasing
- Vignette - darkens the image towards the corners, which looks a bit filmic
- Scanlines - creates a CRT screen like effect by drawing horizontal lines. Note that this doesn't make that much sense because the real PSP had an LCD screen, but I guess could be cool for some arcade ports.
Framerate control settings
Especially on mobile platforms, the graphics rendering can be the performance bottleneck. Hence, speed can be improved by simply skipping the rendering process on every other frame, or more. The drawback is of course that the framerate will decrease, and in some cases there can be flickering issues. The setting to control this is called Frameskipping.
Render duplicate frames
Does what it says - if a game runs at 30hz, we'll still push 60 frames to the monitor. A little more "work" for your device, but can improve timing on some (ie. reduce microstutter)
Buffer graphics
How much latency is allowed between the CPU and GPU. A smaller value means that they might not be able to work in parallel as much, and you might get worse performance, but better latency. This may help in music games, such as Project Diva or Patapon.
MSAA antialiasing
This is the best quality antialiasing you can get in PPSSPP, but it's currently only implemented in the Vulkan backend, and only on desktop GPUs (this will change in the future). Use if if it's available, crank it up to 8x if your GPU can handle it for ultra smooth edges on things.
Hardware transform
Runs the transform pipeline (lighting, transform etc) on the GPU. This is what you want - turning this off is only useful for debugging.
Software skinning
Runs "skinning" on the CPU instead of the GPU, which does sound like it would be slower but it means that draw calls from the game can more easily be combined, which often improves things, especially on older devices. However, in some games, hardware (vertex shader) skinning can be faster on some devices so we keep the option around.
Geometry shader culling
The PSP has some rather different behavior than PC GPUs about at what depth and in which positions triangles get "culled" (removed) and clipped.
Modern PC GPUs lets us emulate these behaviors efficiently if they support clip and cull planes, but not all GPUs do. For those that don't, we have added this option to use "geometry shaders" to get the same behavior. Unfortunately these have some performance overhead, so we offer the option to turn them off - most games don't in fact need this, though some do - if weird geometry is obscuring the camera, you're going to want to enable this.
Speedhacks
These are settings that can speed things up in games. The effect ranges from none to large, depending on which game you're trying to play, and the hardware you're trying to play it on.
-
Vertex caching
Saves some CPU work every frame translating vertex from the PSP's formats to PC-compatible format. Usually around a 5% speed boost at most. Most games are fine with this but there's a small number where it can cause glitches.
-
Skip buffer effects
The PSP can render to any location in its VRAM and use as either the scanout buffer (what you see on the screen) or textures. Many games use this to implement various special effects. We simulate this by representing each detected PSP framebuffer with a native framebuffer image.
Disabling it, and thus skipping rendering of everything that's not rendering directly to the backbuffer, is a speed hack, that may or may not speed up some games, and may cause severe graphical artifacts and/or screen flickering.
Alternative speed
Lets you set an alternative speed to play at, that can be toggled with a bindable key or button.
Useful for passing very tricky sections in games in slow motion, or for speeding things up in a more predictable manner than using the unlimited fast-forward key.
Unfortunately due to how the way this works, audio will glitch and crackle at any other speed than 100%.
Spline/Bezier curves quality
The PSP is capable of drawing curves using splines and bezier curves. This is not widely used but there are a few games out there that use it heavily, like Pursuit Force and Loco Roco.
This setting allows reducing the visual quality of these curves for higher performance.
Texture Scaling
Texture scaling improves texture detail. However, it is an expensive process and can cause slowdown.
PSP games generally have quite low texture detail, as more isn’t needed due to the low resolution of the PSP display, and the lack of RAM and VRAM available. The Texture Scaling feature uses an upscaling filter to give the illusion of sharper texture detail. Doesn’t work great with all art styles but some games are very much improved.
There is generally no point in going beyond 4x texture scaling unless you are running at very high resolutions.
If you are using the Vulkan backend, try the Texture Shader option for some GPU upscaling method, than run without the performance penalty.
Types of Upscale algorithms:
- xBRZ - a sharpening upscale algorithm. See here for examples.
- Bicubic - a smooth look
- Hybrid - uses bicubic for smooth areas. Can greatly improve sky textures over plain xBRZ.
Texture Filtering
-
Anisotropic Filtering: Improves sharpness of textures at shallow angles. See wikipedia for some example pictures. There are generally no drawbacks to using it - PPSSPP's performance is rarely bottlenecked by texture sampling.
-
Texture Filtering - how textures are drawn on the screen
- Auto - follows what the game sets
- Nearest - pixellates textures like on the PS1
- Linear - force all textures to be filtered smoothly
- Auto Max Quality - Like auto, but will generate extra mipmaps where the game doesn't supply them. Can cause artifacts with things like fence textures, but will generally give you a smoother look in the distance in 3D games, especially combined with anisotropic filtering.
For most games, max anisotropic + auto max quality will give you the best results. For a few games like Pursuit Force, switch back to just Auto. This may be made automatic in the future.
Lower resolution for effects
Sometimes games will draw effects that are meant to blur the screen in various ways, such as light bloom effects. PSP games are all designed for 480x272 though, so when it does the blurring, it basically just resizes the things it wants to blur down by a certain %. Now, enter PPSSPP: let's say we renders at 4x or even 8x the original resolution. That means that the "blurred" version is actually still pretty sharp and detailed. So then the supposedly blurred image is applied to the screen and... it kinda looks like a strange outline, after image or ghosting.
Lower resolution for effects forces images other than the main render targets to render at low resolution just like on the real PSP, working around the problem pretty well.
The different levels just represents a series of checks we add to identify this situation, with varying confidence.
Overlay Information
- Show FPS Counter - shows FPS at the top right corner in-game.
- Show debug statistics - shows realtime information which can be useful for debugging games. It is primarily a developer option.
Audio
- Global volume - sets the overall volume
- Reverb volume - lets you separately control the volume of reverb and echo effects
Controls
Enable standard shortcut keys
If this is checked, keys like the Windows key, alt key etc can be used as normal. If you instead want to map those, uncheck this option.
Control Mapping
Rebind PSP controls to keyboard, game pad and virtual buttons.
Haptic Feedback
If this is enabled, the device will vibrate every time a button is pressed. Useful of mobile devices for tactile feedback.
On-screen touch controls
This option can be enabled to use on-screen controls. This is useful on devices such as phones and tablets with no hardware buttons.
Button Opacity
Used to change the opacity of buttons. An opacity of 0 is completely transparent. Opacity of 100 is fully opaque
Auto-hide buttons after seconds
After this number of seconds of inactivity, touch-screen buttons are hidden. This is nice when playing on the gamepad or watching long cutscenes.
Edit touch control layout
Used to move on-screen buttons to custom positions.
Hold down a button and drag the button to the desired location. Then click on Back to save changes.
To Reset changes, press the Reset button.
System
Language
Change the default language of PPSSPP's user interface.
UI Sound
Enables/disables little sound effects when navigating the UI.
Emulation
Fast memory
Fast Memory (unstable)
This option changes PPSSPP such that memory accesses that the game makes are not checked before they are performed. Thus, there is an increase in speed.
Cheats
Enable Cheats
Used to enable or disable cheats in PPSSPP.
Tools
System Information
Shows device-related information such as the system specifications, OpenGL extensions and OpenGL ES extensions.
Hidden settings
You can manually edit PSP/SYSTEM/ppsspp.ini in your memstick directory to set these.
Nice copy-paste-able lines below:
[Recent]
MaxRecent = 0 # will remove the Recent tab